AJA Hi5-3D - Handbuch (Seite 11)

Hi5-3D v2.0 www.aja.com 11
NOTE: LEDs adjacent to each SDI input connector indicate by color the detected signal type. Green is
SD-SDI, red is HD-SDI.
Selecting a Mini-Converter with the dropdown menu causes this application to connect
to the selected converter. The graphic of Mini-Converter and text below it provides:
• Type of converter
• Firmware version
• Serial number of the unit
A status field at the bottom of the screen shows if your application is connected and
communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the current
settings and change any values. Making a change communicates that new value to the
Mini-Converter’s non-volatile memory.
Tabbed Screens The Tabs delineate control screens with groups of controls for each type of task to be
performed. The controls for the actual configuration parameters are specific to each
Mini-Converter type. Click on any of the tab buttons and the screen below will change to
match. Each of these screens are described on the following pages.
Video Tab Screen
With your Mini-Converter connected and selected, you’ll click on the Video tab to view
and make changes to the converter’s Video I/O settings.
Any changes you make are immediately implemented and are saved, overwriting
previous settings.
Figure 8. MiniConfig, Video Tab Screen