AJA Hi5-3D - Handbuch (Seite 14)

Hi5-3D v2.0 www.aja.com 14
Analog Audio—use to select the channel pair that will be output to the Analog RCA
connectors (L/R).
• Channel 1+2: output channels 1 & 2 from the SDI stream to the two Analog Audio RCA
connectors (L/R).
• Channel 3+4: output channels 3 & 4 from the SDI stream to the two Analog Audio RCA
connectors (L/R).
• Channel 5+6: output channels 5 & 6 from the SDI stream to the two Analog Audio RCA
connectors (L/R).
• Channel 7+8: output channels 7 & 8 from the SDI stream to the two Analog Audio RCA
connectors (L/R).
Update Tab Screen
Use this Update screen to view the software version currently installed on the converter
or install new software.
Figure 10. MiniConfig, Update Screen
NOTE: When discussing Mini-Converters, “Firmware” is software that will be stored in the Mini-
Converter’s non-volatile memory and used when it is powered up. This is something different
than the MiniConfig application software. The version numbers shown in the Update screen
refer only to the firmware.
The following fields and control are present in this screen:
Installed: This field shows the version of the firmware currently installed inside the Mini-Converter.
Desired: This field shows the version of firmware embedded in the MiniConfig application which
you can install into the Mini-Converter by clicking the Update button.
Update: This button initiates a software update operation loading the “Desired” version of
firmware into the Mini-Converter’s non-volatile memory.
Progress: This indicator bar shows the progress of software being installed.