AJA Hi5-3D - Handbuch (Seite 7)

Hi5-3D v2.0 www.aja.com 7
I/O Connections
Figure 2. Hi5-3D Converter
Installation
Typically, Hi5-3D installation consists of the following steps:
1. Ensure the Hi5-3D is disconnected from power.
2. Connect video equipment to the convertor BNCs and HDMI connector.
3. Connect audio equipment to RCA connectors (optional)
4. Apply power to the converter (AJA power supply included).
5. The Hi5-3D will now run using the default factory settings. If you wish to alter the
factory settings, you’ll need to install the AJA Mini Config software (supplied on CD)
on a computer, attach the Hi5-3D via USB to the computer, and then make your
changes. This process is detailed on the following pages.
SD/HD-SDI
+ 5 to 20 VDC
Power
Input
2-Channel
Unbalanced
Analog
Audio
(RCA Jacks)
Output
HDMI Connector Input 1 BNC
SD/HD--SDI
Input 2 BNC
USB
Port
Red: Lock to HD-SDI
Green: Lock to SD-SDI
LOCK LED
SD/HD-SDI
Output