AJA Hi5-3D - Handbuch (Seite 5)

Hi5-3D v2.0 www.aja.com 5
Chapter 1: Introduction
The Hi5-3D is a 3D video multiplexer that combines two HD-SDI Inputs into various
multiplexed 3D formats for output on HDMI 1.4a and HD-SDI. Non-3D input (SD-SDI, HD-
SDI) at either input will be passed to the HDMI output.
The HDMI 1.4a output supports EDID transactions that allow automatic 2D/3D
configuration per the HDMI monitor’s capabilities. Input SDI 2 will be frame synchronized
to input SDI 1 in 3D Modes.
Embedded SDI input audio is embedded in both the HDMI and SDI outputs. 2 channel
RCA audio output is also supported with user control of channel selection. The Hi5-3D
supports AJA’s Mini-Config application for user configuration and firmware download.
Features
• HD-SDI to HDMI 1.4a with additional SDI output
• Non-3D SD/HD-SDI passed to HDMI output
• 10-bit HDMI 1.4a support including 3D and embedded audio
• Frame-sync mode for HD formats: the right eye will be frame synchronized to the left
eye.
• Anaglyph mode for calibrating 3D camera rigs (only luma data preserved)
• Additional 2-Channel RCA jack audio output
• Setup via Dipswitch or PC/Mac using USB port and supplied USB cable (USB
configuration software application supplied on CD)
• Uses universal input +5V power supply AJA model DWP-U-R1 (included)
• 5 year warranty
Block Diagram
Figure 1. Hi5-3D Converter, Simplified Block Diagram
3D
Multiplexing
and SDI
Processing
Audio
D/A
Video
Audio
HDMI
Transmitter
Video with Embedded Audio
2-Channel
Analog Audio
Monitor Output
HDMI 1.4a Output
with Embedded
Audio
SD/HD/3G-SDI
Input 1
SD/HD/3G-SDI
SDI Receiver
SD/HD/3G-SDI
Input 2
USB Port
(connect to PC or Mac)
Selects 8 o 10-bit Video
and other Functions
SDI Receiver