TechniSat SkyCable DVB-S2/QAM QUAD Benutzerhandbuch
Seite 27

27
EN
MONT_SkyCable_DVB-S2_QAM_QUAD_DE_EN_print.doc 09.08.2012 08:55 Seite 27
4.
QAM Mode:256
QAM constellation
Press the ► or ◄ cursor button to set the constellation to 16-, 32-, 64-,
128- or 256-QAM. The data is transferred when the OK button is
pressed. The constellation depends on the gross data rate of the received
satellite transponder (see section 4.1) and can selected only in channel A,
valid for all 4 QAM channels.
The output level of all 4 QAM channel will automatic adapted to the
selected QAM constellation.
5.
I/Q Inver:YES
Invert the modulation spectrum
Press the ► or ◄ cursor buttons to invert the modulation spectrum.
The data is transferred when the OK button is pressed.
YES =
Spectrum inverted (inverted position)
NO
=
Spectrum not inverted (normal position)
6.
Modulation:YES
Modulation On/Off
Press the ► or ◄ cursor buttons to switch the output signal on or off.
The data is transferred when the OK button is pressed.
YES =
Modulation on
NO
=
Modulation off
2.1.5 Display Line 4
Select line 4 as described in 2.1.2.
If the flashing cursor is located in the fourth line the following sub-items
can be called up by repeatedly pressing the Menu button:
1.
P010,010,110,005
=
IP address
2.
M255,255,255,000
=
Subnet mask
3.
G010,010,060,001
=
Standard gateway
4.
T000,010,070,066
=
SNMP trap destination IP
5.
MAC:000e26ff4745
=
MAC address
6.
Temperature:35°c
=
Temperature
7.
MAINVer:28QM0005 =
Firmware version
8.
MCU Ver:01,05,0a
=
Software version
9.
Factory Setting?
=
Factory default setting
10.
Reboot System?
=
Reboot
11.
SN:01009035002
=
Serial number
1.
P010,010,110,005
IP address
The IP address is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered. The IP
address is required for controlling the head station via a PC and should
only be allocated to the network once!
2.
M255,255,255,000
Subnet mask
The subnet mask address is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered.
02:QPSK->QAM A
Tuner Lock:Yes
RF Frq:306,0MHz
P010,010,110,005