TechniSat SkyCable DVB-S2/QAM QUAD - Handbuch (Seite 30)

30
EN
MONT_SkyCable_DVB-S2_QAM_QUAD_DE_EN_print.doc 09.08.2012 08:55 Seite 30
2.3 USB configuration
Die QAM-QUAD card has the possibility to configure all input and output parameters by USB. For
this you need a PC, an empty memory USB medium and the programming remote control
0000/5961.
For every channel (A, B, C + D) an own configuration file must be provided by using PC.
The construction of these files easier occurs with a text editor.
Proceeding channel A
Create a text file named config_A.txt
Value Paramter Range of values Example
11836 Sat Frq 0 - 99999
27500 Sat SR 0 - 99999
10600 LNB Frq 0 - 99999
0 LNB Set 0 = 18V/0k (HL)
1 = 18V/22K (HH)
2 = 13V/22K (VH)
3 = 13V/0K (VL)
306 RF Frq 100 - 858
0 RF Attn 0 - 9
6900 QAM SR 2000 - 7200
4 QAM Mode 2 = 16-QAM
3 = 32-QAM
4 = 64-QAM
5 = 128-QAM
6 = 256-QAM
0 I/Q Inver 0 = not inverted
1 = inverted
1 Modulation 0 = off
1 = on
Proceeding channel B
Create a text file named config_B.txt
Value Paramter Range of values Example
11836 Sat Frq 0 - 99999
27500 Sat SR 0 - 99999
10600 LNB Frq 0 - 99999
0 LNB Set 0 = 18V/0k (HL)
1 = 18V/22K (HH)
2 = 13V/22K (VH)
3 = 13V/0K (VL)
0 RF Frq Value always 0
0 RF Attn 0 - 9
0 QAM SR Value always 0
0 QAM Mode Value always 0
0 I/Q Inver Value always 0
1 Modulation 0 = off
1 = on