TechniSat SkyCable DVB-S2/QAM QUAD - Handbuch (Seite 28)

28
EN
MONT_SkyCable_DVB-S2_QAM_QUAD_DE_EN_print.doc 09.08.2012 08:55 Seite 28
3. G010,010,060,001 Standard gateway
The standard gateway is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered.
4. T000,010,070,066 SNMP trap destination IP address
The trap destination IP address is entered using the numeric keys. The
data is automatically transferred after all 12 digits have been entered.
5. MAC:000e26ff4745 MAC address
Displays the card’s MAC address. No selection options.
6. Temperature:35°c Temperature
Displays the card temperature. No selection options.
7. MAINVer:28DM0005 Firmware version
Displays the card’s firmware version. No selection options.
8. MCU Ver:01,05,0a Software version
Displays the card’s MCU software version. No selection options.
9. Factory Setting? Factory default setting
Press the OK button to get the selection option:
OK=Y │ EXIT=N
Confirm by pressing OK and the entire card (receiving unit A and B) is
reset to the factory default settings (Preset). All settings previously made
are deleted irretrievably.
Exit this option by pressing EXIT. The card only becomes operable again
after the boot process is completed.
10. Reboot System? Reboot
Press the OK button to get the selection option:
OK=Y │ EXIT=N
Confirm with OK to reboot the card - exit this option by pressing EXIT. The
card only becomes operable again after the boot process is completed.
11. SN:01009035002 Serial number
Displays the card’s serial number. No selection options.