Several hdmi sources, Firmware upgrade – AXING HoE 1-00 Benutzerhandbuch
Seite 20
Operation Instructions | HoE 1-00 | HDMI over Ethernet
8
2015-03-14 | © AXING AG | Swizzerland | Technical data are subject to change, errors and omissions excepted
8. Switch off the HoE 1-0x and unplug the patch cable.
Note that the IP address is reset to the factory IP address after a reset.
3.3.
Several HDMI sources
Network configuration of transmitters and receivers for several HDMI sources. This
configuration is mandatory!
If several HDMI sources are to be distributed to different receiving networks, then the Ethernet Management
switch must be configured in such a way that the transmitter and receiver of one source work in a separate
closed VLAN network respectively.
3.4.
Firmware Upgrade
A firmware upgrade is performed in the Advanced Tools menu. For current firmware go to www.axing.com and
then click Download | Software/Firmware: