CEJN System P8 - Handbuch (Seite 16)

16
3.2 When leaving the bus
RELEASE the hose plate from the ramp by
grasping the yellow plate on each side with
your fingers and pulling it towards you.
PULL OUT the hose plate from the ramp using
the black handles.
Attach the hose plate to the bus by guiding the
pin into the centre hole and PUSHING the hose
plate IN. This is best achieved by pressing the
plates together with the fingers while holding
onto the handles of the bus plate.
GB
For further QUESTIONS & ANSWERS, please go to www.cejn.com/P8