Eneo VKCD-1334SM/210 - Handbuch (Seite 56)

56
9. Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem Solutions
Nothing appears
on the screen. • Check that the power cord and line connection between
the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO cable to
the camera VIDEO output jack.
The image on the
screen is dim. • Is the lens stained with dirt ?
Clean your lens with soft, clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change the
camera position.
• Adjust the lens’ focus properly.
The image on the
screen is dark. • Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75ohms/Hi-z
properly.
• Adjust DC level, VR level properly
The camera is not
working properly,
and the surface of
the camera is hot. • Check that you have properly connected the camera to
an appropriate power source.
The image on the
screen flickers. • Is the camera facing to direct sunlight or fluorescent
lighting ?
Change the camera position.