Crivit SB-1557 - Handbuch (Seite 5)

5 GB/IE
3 Years Warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory gua-
rantees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 78985
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
riding (Fig. E)
For the first attempts, it is helpful to let a
second person support you.
The spinboard is moved forward by turning both
the foot plates. In doing this, the two feet always
oppose each other using a rocking motion,
from the tips of the toes to the heels. Bend the
knees slightly after pushing off. The upper body
remains upright.
The shoulders move alternately forwards and
backwards, opposing the legs. The hips remain
stable.
braking
During the ride, push with the toes of both feet
forward, so that the spinboard tips forward.
After tipping the spinboard, continue to walk on.
Maintenance
• Before ever ride, check the stability of the
wheel studs and all the other fastenings.
• Do not use the product if there are obvious
defects and damage.
• Remove any sharp edges that arise through
use.
• Pay attention to chips and tears in the decks,
and remove them if necessary.
• Regular maintenance and cleaning con-
tributes to the safety and preservation of the
product.
• Always store the product dry and clean, and
at room temperature.
• Only clean with water; never use aggressive
cleaning agents. Afterwards, dry with a clea-
ning cloth. Dry damp or wet ball bearings
with a clean cloth. Grease the bearings with
a suitable lubricant (oil or grease) to prevent
rust forming on the outside.
information regarding
disposal
Please dispose of the packaging and product
correctly and in an environmentally-friendly man-
ner. Dispose of the product through an appro-
ved waste disposal firm or by using your local
municipal administration. Observe the current
applicable legislation.