Mid-mounting a blackdiamond 12802 chassis – Extreme Networks 12800 Series Benutzerhandbuch
Seite 67
Rack-Mounting the BlackDiamond 12802 Chassis
BlackDiamond 12800 Series Switches Hardware Installation Guide
67
3
Slide the chassis into the system rack.
●
Take care to load the rack so that it is not top-heavy. Start from the bottom and work up.
●
Do not cover vents that would restrict airflow. Leave a half-rack space between the units for
adequate ventilation.
4
Attach the chassis to the system rack using eight rack mounting screws. Refer to
for the
screw locations.
Figure 35: Securing the BlackDiamond 12802 Chassis to the Rack (Front-mount Position)
Mid-Mounting a BlackDiamond 12802 Chassis
To mid-mount the BlackDiamond 12802 chassis in a rack:
1
Place each mounting bracket against the switch chassis with the mounting flange at the middle of
the chassis side (
).
Figure 36: Mounting Flanges at the Middle
2
Insert and tighten the provided flat-head screws to secure the brackets to the chassis.
3
Slide the chassis into the equipment rack.
BD_151
Bracket
Bracket
Screw
BD_143