Extreme Networks 12800 Series - Handbuch (Seite 87)

Using the BlackDiamond12804 AC Power Cord Retainer Channel
BlackDiamond 12800 Series Switches Hardware Installation Guide 87
Figure 49: Securing the BlackDiamond 12804 AC Power Cord Retainer
5 Starting from the left, lay the first four power cords into the channel (see Figure 50 ).
6 Lay the last two power cords on top of the bottom four cords (see Figure 50 ).
Figure 50: Routing the Power Cords in the Channel
NOTE
Leave the ESD-preventive wrist strap permanently connected to the switch, so that the strap is always available
when you need to handle ESD-sensitive components.
EX_139
Install and secure the channel bracket to
the switch by tightening both captive screws
Captive screw
Captive screw
From the left, lay first four
power cords into channel bracket
Lay last two power cords
onto others