FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 146)

Device Configuration Commands Command Reference
Intelligent Blade Panel Module
145
Packets Transmitted 65-127 Octets: The total number of packets (including bad packets)
received that were between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
Packets Transmitted 128-255 Octets:
The total number of packets (including bad
packets) received that were between 128 and 255 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets Transmitted 256-511 Octets:
The total number of packets (including bad
packets) received that were between 256 and 511 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets Transmitted 512-1023 Octets:
The total number of packets (including bad
packets) received that were between 512 and 1023 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets Transmitted 1024-1518 Octets:
The total number of packets (including bad
packets) received that were between 1024 and 1518 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets Transmitted 1519-1522 Octets:
The total number of packets (including bad
packets) received that were between 1519 and 1522 octets in length inclusive (excluding
framing bits but including FCS octets).
Max Info:
The maximum size of the Info (non-MAC) field that this port will receive or
transmit.
Total Packets Transmitted Successfully
Unicast Packets Transmitted: The total number of packets that higher-level protocols
requested be transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
Multicast Packets Transmitted:
The total number of packets that higher-level protocols
requested be transmitted to a Multicast address, including those that were discarded or
not sent.
Broadcast Packets Transmitted:
The total number of packets that higher-level protocols
requested be transmitted to the Broadcast address, including those that were discarded or
not sent.
Total Transmit Errors
FCS Errors: The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad
FCS with an integral number of octets
Tx Oversized:
The total number of frames that exceeded the max permitted frame size.
This counter has a max increment rate of 815 counts per sec. at 10 Mb/s.
Underrun Errors:
The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
Total Transmited Packets Discards
Single Collision Frames: A count of the number of successfully transmitted frames on a
particular interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames:
A count of the number of successfully transmitted frames on
a particular interface for which transmission is inhibited by more than one collision.
Excessive Collisions:
A count of frames for which transmission on a particular interface
fails due to excessive collisions.
EAPOL Frames Received:
The number of valid EAPOL frames of any type that have been
received by this authenticator.
EAPOL Frames Transmitted:
The number of EAPOL frames of any type that have been
transmitted by this authenticator.
Time Since Counters Last Cleared:
The elapsed time, in days, hours, minutes, and