FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 183)

Management Commands Command Reference
Intelligent Blade Panel Module
182
Default Setting
None
Command Mode
Global Config
7.5.3.4 exec-timeout
This command sets the remote connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. A value of 0 indicates that a
session remains active indefinitely. The time is a decimal value from 0 to 160.
Note:
Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
exec-timeout <1-160>
no exec-timeout
<sec> -
max connect time (Range: 1 -160).
no -
This command sets the remote connection session timeout value, in minutes, to the
default.
Note: Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Any keystroke will also activate the new timeout duration.
Default Setting
5
Command Mode
Telnet Config
7.5.3.5 password-threshold
This command is used to set the password instruction threshold limited for the number of failed
login attempts.
Syntax