FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 176)

Management Commands Command Reference
Intelligent Blade Panel Module
175
< gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0
Command Mode
Global Config
7.5.1.7 ip address protocol
This command specifies the network configuration protocol to be used. If you modify this value,
the change is effective immediately.
Syntax
ip address protocol {{bootp | dhcp [<vlanID>]} | none}
<bootp> - Obtains IP address from BOOTP.
<dhcp> - Obtains IP address from DHCP.
<none> - Obtains IP address by setting configuration.
<vlanID> - VLAN ID (Range: 1 – 4094).
Default Setting
None
Command Mode
Global Config
7.5.1.8 ip address mgmt-vlan
This command specifies the network configuration inband administration VLAN ID to be used.
If you modify this value, the change is effective immediately.