FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 244)

Security Commands Command Reference
Intelligent Blade Panel Module
243
7.9.4.5 radius-server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted
to the RADIUS server if no response is received. The timeout value is an integer in the range of
1 to 30.
Syntax
radius-server timeout <seconds>
no radius-server timeout
<seconds> - the maximum timeout (Range: 1 - 30).
no -
This command sets the timeout value (in seconds) after which a request must be
retransmitted to the RADIUS server if no response is received, to the default value, that is,
6.
Default Setting
6
Command Mode
Global Config
7.9.4.6 radius-server msgauth
This command enables the message authenticator attribute for a specified server.
Syntax
radius-server msgauth <ipaddr>
<ipaddr> - is a IP address.
Default Setting
None
Command Mode
Global Config