FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 189)

Management Commands Command Reference
Intelligent Blade Panel Module
188
Command Mode
Privileged Exec
Display Message
Authentication Flag: May be enabled or disabled. The factory default is enabled. Indicates
whether authentication failure traps will be sent.
Link Up/Down Flag:
May be enabled or disabled. The factory default is enabled. Indicates
whether link status traps will be sent.
Multiple Users Flag:
May be enabled or disabled. The factory default is enabled. Indicates
whether a trap will be sent when the same user ID is logged into the IBP more than once at
the same time (either via telnet or serial port).
7.5.4.3 snmp-server sysname
This command sets the name of the IBP. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server sysname <name>
<name> - Range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
7.5.4.4 snmp-server location
This command sets the physical location of the IBP. The range for name is from 1 to 31
alphanumeric characters.
Syntax
snmp-server location <loc>
<loc> - range is from 1 to 31 alphanumeric characters.