Siemens KVM s2-0411 - Handbuch (Seite 29)

Basic operations Selecting display language
21
590-595-609A
Figure 10: Menu window
3.5.3.2 Selecting the order of the target devices
 Click one of the following buttons:
• Select Name to list the target devices alphabetically by target device name.
-or-
• Select EID to list the target devices numerically by EID number.
-or-
• Select Port to list the target devices numerically by port number.
 Click OK.
3.5.3.3 Selecting a key combination to start the OSCAR interface
 In the Invoke OSCAR section, select which key combinations you want to use to
start the OSCAR interface, then press your selected combination.
 Click OK.
You can set a screen delay so that you can select a target device using the keyboard
without starting the OSCAR interface. A screen delay specifies the length of time that
elapses between when Print Screen is pressed and when the OSCAR interface starts.
3.5.3.4 Setting a screen delay
 Type the number of seconds (0 through 9) to specify the length of time that elapses
between when Print Screen is pressed and when the OSCAR interface starts. If you
specify 0, there is no delay.
 Click OK.
3.5.4 Selecting display language
Use the Setup window to change the display language for the OSCAR interface.