Siemens KVM s2-0411 - Handbuch (Seite 37)

Basic operations Viewing and disconnecting user connections
29
590-595-609A
3.8 Viewing and disconnecting
user connections
You can view and disconnect users from target devices through the User Status
window. The user (U) is always visible; however, you can display either the target
device name or EID number to which a user is connected. If no user is currently
connected, both the User and Server Name fields are blank.
Figure 16: User Status window
3.8.0.1 Viewing current user connections
 Click Commands - User Status. The User Status window opens.
3.8.0.2 Disconnecting a user
 From the User Status window, click the letter that corresponds to the user to
disconnect. The Disconnect
window opens.
 Complete one of the following steps:
• Click OK to disconnect the user and return to the User Status window.
-or-
• Click X or press Escape to exit the window without disconnecting a user.
If the User Status list has changed since it was last visible, the mouse cursor will turn
into an hourglass as the list is automatically updated. No mouse or keyboard input is
accepted until the list update is complete.
3.8.0.3 Resetting the keyboard and mouse
You can reset the keyboard and mouse by clicking Commands - Device Reset. If the
keyboard or mouse is still not responding, you might be able to re-establish operation of
these peripheral devices by issuing a Reset command for the mouse and keyboard
settings on the target device. The Reset command sends a hot-plug sequence to the
target device, which causes the mouse and keyboard settings to be sent to the