Siemens KVM s2-0411 - Handbuch (Seite 39)

Basic operations Removing a target device from the scan list
31
590-595-609A
 The window contains a listing of all target devices that are attached to the
appliance. To select target devices to be scanned, complete one of the following
steps:
• Select the check box next to the target devices that you want to scan.
-or-
• Double-click on a target device name or port.
-or-
• Press Alt and the EID number of the target device that you want to scan. You
can select up to 16 target devices from the list.
 In the Time field, type the number of seconds (from 3 to 255) of time before the
scan moves to the next target device in the sequence.
 Click OK.
3.9.2 Removing a target device from the scan list
 Complete one of the following steps:
• In the Scan window, clear the check box next to the target device to be
removed.
-or-
• Double-click on the target device name or port.
-or-
• Press Shift + Delete to remove the selected target device and all entries below
it.
-or-
• Click the Clear button to remove all target devices from the scan list.
 Click OK.
3.9.3 Starting the scan mode
 Click Commands. The Commands window opens.