Siemens KVM s2-0411 - Handbuch (Seite 32)

Setting the keyboard country code Basic operations
24
590-595-609A
Figure 12: Keyboard window
3.5.6.1 Changing the keyboard country code
 Press Print Screen to start the OSCAR interface. The Main window opens.
 Click Setup - Keyboard. The Keyboard window opens.
 Select the country code for the keyboard, and click OK. Confirm the change in the
Keyboard Warning window.
 Click OK to save the change, or click X or press Escape to exit without saving the
change.
3.5.6.2 Setting appliance security
You can enable a screen saver to start if the user remains unused for a specified length
of time. When the screen saver starts, the user is disconnected from any target device
to which it was connected. The screen saver stops when you press any key or move the
mouse.
To immediately start the screen saver, press Print Screen and press Pause.
If you set a password, the keyboard and mouse are locked when the screen saver
starts. When you press a key or move the mouse while the screen saver is running, a
Password window opens, and you must type the password and click OK to unlock the
keyboard and mouse.
If you forget the password, you must call technical support. See Appendix
5.4 Technical Support on page 45 for contact information.