Burkert Type 8635 - Handbuch (Seite 113)

8635 - 111
B
USKOMMUNIKATION KONFIGURIEREN
(PROFIBUS PA)
Implementation_Type = "SPC4/ITEC"
Bitmap_Device
= "bue0569n"
Bitmap_Diag = "bue0569d"
;Bitmap_SF = ""
;********* Additional Keywords For Different Phsical Interfaces ***************
;***************** DP Master (Class 1) Related Keywords **********************
;********* Additional Master Related Keywords For DP Extensions **********
;******************** Basic DP_Slave Related Keywords ***********************
Freeze_Mode_supp
= 0
Sync_Mode_supp = 0
Auto_Baud_supp = 0
Set_Slave_Add_supp = 1
Min_Slave_Intervall
= 250
Modular_Station = 1
Max_Module = 1
Max_Input_Len = 15
Max_Output_Len = 10
Max_Data_Len = 25
Max_Diag_Data_Len = 20
Max_user_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00
Unit_Diag_Bit(16) = "Error appears"
Unit_Diag_Bit(17) = "Error disappears"
Unit_Diag_Bit(24) = "Hardware failure electronics"
Unit_Diag_Bit(25) = "Hardware failure mechanics"
Unit_Diag_Bit(26) = "Motor temperature too high"
Unit_Diag_Bit(27) = "Electronic temperature too high"
Unit_Diag_Bit(28) = "Memory error"
Unit_Diag_Bit(29) = "Measurement failure"
Unit_Diag_Bit(30) = "Device not initialized"
Unit_Diag_Bit(31) = "Device initialization failed"
Unit_Diag_Bit(32) = "Zero point error"
Unit_Diag_Bit(33) = "Power supply failed"
Unit_Diag_Bit(34) = "Configuration invalid"
Unit_Diag_Bit(35) = "Restart"
Unit_Diag_Bit(36) = "Coldstart"
Unit_Diag_Bit(37) = "Maintenance required"
Unit_Diag_Bit(38) = "Characteristics invalid"
Unit_Diag_Bit(39) = "Ident_Number violation"
Unit_Diag_Bit(55) = "Extension Available"
; Modules for Analog Output
; RB = READBACK, CB = CHECKBACK, RC_OUT = RCAS_OUT, RC_IN = RCAS_IN
;
Module = "Setpoint SP_D" 0x82,0x84,0x08,0x05
EndModule
Module = "SP+READBACK+POS_D" 0xC6,0x84,0x86,0x08,0x05,0x08,0x05,0x05,0x05
EndModule
Module = "SP+CHECKBACK" 0xC3,0x84,0x82,0x08,0x05,0x0A
EndModule
(2.)
(3.)
(1.)