WIKA UPT-21 - Handbuch (Seite 44)

44 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
11. Detail setup
11. Detail setup
Requirement: Display and operating unit fitted.
11.1 Setting the language
Available languages: German, English, French, Spanish
1. Open the operating menu with [↵].
Select “Detail setup” and confirm with [↵].
2. Select “Language” and confirm with [↵].
3. Select language and confirm with [↵].
Language is set.
11.2 Marking the measuring point (TAG)
11.2.1 Setting the TAG short
TAG short enables 8 figures with a limited character set (numbers and capital letters).
TAG short can be indicated in the additional display.
1. Open the operating menu with [↵].
Select “Detail setup" and confirm with [↵].
2. Select “Marking” and confirm with [↵].
3. Select “TAG short” and confirm with [↵].
4. Change figure using [▲] [▼] and confirm with [↵].
The cursor moves to the next figure. Repeat for each
figure.
TAG short is set.
11.2.2 Setting the TAG long
TAG long enables 32 figures with alphanumeric characters (all characters in accordance
with HART ® revision 7). TAG long can be indicated in the additional display.
Setting is made as described in chapter 11.2.1 “TAG short”.