WIKA UPT-21 - Handbuch (Seite 6)

6 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
1. General information
1. General information
■ The process transmitter described in the operating instructions has been designed
and manufactured using state-of-the-art technology. All components are subject
to stringent quality and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the instru-
ment. Working safely requires that all safety instructions and work instructions are
observed.
■ Observe the relevant local accident prevention regulations and general safety regula-
tions for the instrument's range of use.
■ The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■ The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the instrument.
■ The general terms and conditions contained in the sales documentation shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PE 86.05
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.