WIKA UPT-21 - Handbuch (Seite 7)

7 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
1. General information / 2. Safety
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to equipment or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appro-
priate instrument has been selected in terms of measuring range, design
and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equip-
ment.
Further important safety instructions can be found in the individual
chapters of these operating instructions.
2.1 Intended use
The process transmitter measures gauge pressure, absolute pressure and vacuum. The
physical quantity pressure is converted into an electrical signal.
The process transmitter has been designed exclusively for industrial applications in
internal and external locations. Its scope of application is defined by its technical perfor-
mance limits and its materials. Improper use is defined as any application that exceeds
the technical performance limits or is not compatible with the materials. Checking
against improper use is the responsibility of the operator.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its technical
specifications requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.