1 installation site, 2 close mounting, 3 electrical isolation – JUMO 14597 safetyM TB/TW08 Temperature Limiter and Temperature Monitor Operating Manual Benutzerhandbuch
Seite 71: Installation site, Close mounting, Electrical isolation, 3 installation
Advertising
3 Installation
9
3.1
Installation site
3.2
Close mounting
3.3
Electrical isolation
a
As far as possible, the installation site should be vibration-free to prevent the screw-connections from working loose.
a
The installation site should be free from aggressive media, e.g. acids and lyes, and, if possible, free from dust, flour or
other suspended matter to prevent blocking of the cooling slots.
a
It is admissible to install several devices adjacently with a minimum spacing of 10 mm or
one above the other with a minimum spacing of 10 mm.
(1) Measuring input
(3) Binary input
(5) Set-up interface
(6) Display
(7) Keys
(9) Voltage supply
(2) Relay output K1
(4) Relay output KV
(8) Analog output
Advertising