Lenze M300 - Handbuch (Seite 26)

Safety instructions 1
EN
26 Lenze ¯ MDKSEMA ¯ 3.0
0Fig. 0Tab. 0
1 Safety instructions
}
Danger!
Disregarding the following basic safety measures may lead to severe
personal injury and damage to material assets!
The product−specific safety and application notes given in this documentation must be
observed!
¯ Lenze drive and automation components ...
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live, movable or rotating parts
during or after operation. Surfaces can be hot.
¯ All specifications of the corresponding enclosed documentation must be
observed.
This is vital for a safe and trouble−free operation and for achieving the specified
product features.
The procedural notes and circuit details provided in this document are proposals
which the user must check for suitability for his application. The manufacturer does
not accept any liability for the suitability of the specified procedures and circuit
proposals.
¯ Only qualified skilled personnel are permitted to work with or on Lenze drive and
automation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... who are familiar with the installation, assembly, commissioning and operation of
the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent regulations,
directives and laws applicable at the place of use.
Observe warning signs!
Symbol Description
|
Hot surface :
Use personal protective equipment or wait until the device has cooled down!
}
High leakage current :
Implement fixed installation and PE connection according to EN 61800−5−1!
'
Electrostatic sensitive devices :
Before working on the device, the personnel have to be free from electrostatic charge!