Xoro HRS 8750 CI+ (Satelliten-Receiver DVB-S2) - Handbuch (Seite 64)

ENG18
Engl
ish
First steps
First Time Installation
Before the initial installation, all necessary cables should connect to the satellite dish and the TV.
During the initial start of the Receiver, there appears on the TV screen, the setting - Installation menu.
This menu contains the following options:
1. Antenna Connection
2. Satellite List
3. Antenna Setup
4. Single Satellite Search
5. Multi Satellite Search
6. TP List

Use the arrow keys UP and DOWN to move between
menu items. If the menu item is highlighted, press the
OK button to activate the option. The various options
change the navigation keys UP and DOWN. The
menus you can leave the EXIT button.
Antenna Connection
The menu includes two choices. There are “Fixed Antenna” and “Motor Antenna”.

Satellite List
In this menu you can Add/Delete/Edit/Select the satellite. You can press GREEN button to add a
satellite. And press RED button to edit the setting of the satellite. Press BLUE button to delete the
satellite. Then press OK button to select the satellite.

Antenna Setup
Before you start search, you should enter this menu to setup some options of satellite.
Single Satellite search
In this menu you can select a satellite for search.
Multi Satellite Search
In this menu you can search all the satellites that you selected in satellite list.
TP List
Select a transponder of a satellite for search. And you also can Add/Delete/Edit the transponder. You
can press GREEN button to add a transponder. And press RED button to edit the transponder. Then
press YELLOW button to delete the transponder. Press BLUE or OK button to search the current
transponder.