Xoro HRS 8750 CI+ (Satelliten-Receiver DVB-S2) - Handbuch (Seite 65)

ENG19
Engl
ish
First steps
1. Single connection of dish and receiver
The satellite dish is aligned to a special satellite and you use one LNB. Each LNB is directly
connected to the satellite receiver.
After choosing the satellite make sure that only following parameters are defined:
Satellite: ASTRA
LNB Frequency: Universal (09750-10600)
Transponder: e.g. 12538 H 41250
DiSEqC1.0: Disable
DiSEqC1.1: Disable
22KHz: Auto
Polarity: Auto

Satellite
Here you can choose the satellite which you want.
LNB Frequency
This option is usually associated with the selected LNB type and varies depending on the LNB type. If
the LNB type Universal has been selected, then the corresponding frequency is 9750/10600.
Transponder
Here you have the access to intensity and Quality of the chosen Transponder.
DiSEqC
You can select the DiSEqC1.0 and DiSEqC1.1 mode. With a single connection that is switched
disable.

Channel Search