Electrolux EOB 53003 - Handbuch (Seite 37)

electrolux 37
Operating control light
It indicates that one or more of the heating
elements are turned on.
Oven thermostat control light
This light goes off when the oven heats up
to the temperature set and comes on again
every time the thermostat cuts in to stabilize
temperature.
Safety thermostat
In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
The Cooling Fan
This oven is provided with a cooling fan,
meant to keep the front panel, the knobs
and the oven door handle cool. The fan
switches on automatically after a few
minutes of cooking. Warm air is blown out
through the aperture near the oven door
handle. When the oven is switched off, the
fan will remain on in order to to keep the
controls cool, after which it switches off
automatically.