Burkert Type 8633 - Handbuch (Seite 4)

Operating conditions
Ambient temperature 0... +55°C
Protection type IP 65 to EN 60529
Pneumatic data
Control medium Quality class 3 to DIN ISO 8573-1
Dust content max. particle size 40 µm
max. particle density 10 mg/m
3
Water content max. pressure dew point -20 °C
Oil content max. 25 mg/m 3
Temperature range
of compressed air -10 ... +50 °C
Pressure range 2 ... 10 bar
Please observe the notes in these operating instructions
together with the conditions of use and permitted data that
are specified in the data sheet Type 8633, in order that the device will
function perfectly and remain operable for a long time. On non-
observance of these notes and unauthorized interference with the
device, we will refuse all liability and the warranty on device and
accessories will become void! The device serves exclusively to
actuate pneumatically operated process valves. Any other use or use
exceeding the specific scope is considered to be
non-intended use.
Bürkert will not be liable for any damage resulting therefrom. The
risk will be borne by the user.
GENERAL NOTES
Intended use
• Keep to standard engineering rules in planning the use of and
operating the device!
• Installation and intervention for maintenance work are only
allowed by qualified personnel using suitable tools!
• Observe the current regulations on accident prevention and
safety for electrical devices during operation and
maintenance of the device!
• Before interfering with the system, always switch off the
voltage!
• Note that in systems under pressure, piping and valves may
not be loosened!
• Take suitable precautions to prevent inadvertent operation or
damage by unauthorized action!
• After interruption of the electrical or pneumatic supply, make
sure the process is restarted in a well-defined, controlled
manner!
Safety notes
GENERAL NOTES
Technical data
This device contains electronic components that are sensitive to
electrostatic discharge (ESD). Contact to electrostatically charged
persons or objects will endanger these components. In the worst case,
they will be immediately destroyed or will fail after commissioning.
Observe the requirements of EN 100 015 - 1 in order to minimize the
possibility of, or avoid, damage from instantaneous electrostatic
discharge. Also take care not to touch components that are under
supply voltage.
ATTENTION
EXERCISE CAUTION ON HANDLING!
ELECTROSTATICALLY SENSITIVE
COMPONENTS / MODULES
These instructions explain with the aid of an example the
commissioning of an on-off valve. A detailed description of the device,
including the external connection of the terminals and the data bit
configuration and LED displays, can be found in the operating
instructions for the MiniTOP ON/OFF Type 8633, as well as in the
operating instructions for the valves on the accompanying CD.
Possible expanstion steps
• Inductive proximity switch
• AS interface
Various process valves from the Bürkert range can be combined with
the MiniTop ON/OFF to suit different applications. Y-, flat-seat,
diaphragm or ball valves are suitable.
Electric
TECHNIC
Electric
Niederlassungen / Branch Offices
Operating Instructions 0507/06_EU-ML_00804476
D GB GB GB
We reserv
Operatin
Voltage to
Power co
single
doubl
Position
24V/DC v
(±10% res
24 V/UC,
230V/UC
Electrica
Operatin
Power co
Max. / no
after curr
Outputs
Switching
Watchdo
Inputs
Sensor s
Sensor s
Electrica
Contact addresses / Kontaktadressen
Germany / Deutschland / Allemange
Bürkert Fluid Control System
Sales Centre
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the internet at:
Die Kontaktadressen finden Sie im Internet unter:
Les adresses se trouvent sur internet sous :
www.burkert.com Bürkert / Company / Locations