WolfVision VZ-57plus User Manual - Handbuch (Seite 5)

WORKING ON THE WORKING SURFACE
Synchronized
lightfield
1. Place your subject material on the working surface.
A synchronized lightfield on the working surface marks the pick-up area
of the built-in camera! Just place your subject material in the illuminated
area.
2. Select the enlargement required with the ZOOM-keys (#13).
3. Use the MIRROR-keys (#12) on the control panel or the remote control to
change the vertical position of the pick-up area. The upper mirror can also
be moved by hand! This does not cause any harm to the motor of this
mirror!
DO NOT TOUCH THE MIRROR SURFACE, AS FINGERPRINTS
CAUSE BRIGHT AND HAZY SPOTS ON THE PICTURE ! ALWAYS
KEEP THE MIRROR CLEAN ! -
see page 13
CAUTION: SENSITIVE FRONT COATED MIRROR!
SYNCHRONIZED LIGHTFIELD
If the top light of the Visualizer is used (normal working condition) a synchronized lightfield
always marks the pick-up area of the built-in camera on the working surface.
The alignment of this lightfield is made for working on the working surface. Because of the oblique
mounting of the camera and the light projector of the Visualizer the lightfield shifts to the left when the
distance between the Visualizer and the scanned object is increased (when capturing images outside
of the working surface). This means that the lightfield no longer exactly shows the recorded area. In this
case switch off the Visualizer
’s top light with the LIGHT-key (#21) and work with room light.
4
WORKING OUTSIDE THE WORKING SURFACE
700mm (27.6")
to infinity
For showing 3-dimensional objects with the WolfVision Visualizer, just place them on the working
surface and adjust ZOOM and
FOCUS (as mentioned). Due to a special WolfVision lens the object can
be up to 25 cm (9.7") in height. If the object is to big for the working surface or if you want to show it
from the side just place it behind or in front of the unit and tilt the top mirror by hand or using the
MIRROR-keys (#12).
In this way it is also possible to make
recordings of objects in the room or
surrounding area, just like with a video
camera.
Due to the great focal range it is possible to
show details in every distance to the unit.
If you want to record people you should turn
off the light with the
LIGHT-key (#21), so that
they are not blinded by the light.