LumaSense Technologies IN 5/5 - Handbuch (Seite 18)

INFRATHERM pyrometers IN 5 · IN 5/5
18
3 Overview
1 Stainless steel housing
2 Optics
3 Type
label
4 Rear panel
5 Electrical connection
6 Fixing screws for rear panel
7 Settings at the pyrometer
3.1
Appropriate use
IN 5: The IN 5 is a stationary infrared thermometer for non-contact temperature measurement of non-metallic
surfaces or painted, coated or anodized metals with temperature ranges between -32 and 900°C.
IN 5/5: The IN 5/5 is a stationary pyrometer especially for non-contact temperature measurement of glass
surfaces and quartz surfaces with temperature ranges between 100 and 2500°C.
For optimal match of the instrument to the application the pyrometers are equipped ex works with the desired
optics (for every instrument 3 different optics are available).
3.2
Scope of delivery
Instrument with selectable optics, allen key 2.5 mm, works certificate, user manual.
Note: A connection cable is not included with the instrument and has to be ordered
separately (see section 13, Reference numbers).
4 Safety
Each person working with the pyrometer must have read and understood the user manual before operation.
Also this has to be done if the person already used similar instruments or was already trained by the manu-
facturer.
The pyrometer has only to be used for the purpose described in the manual. It is recommended to use only
accessories offered by the manufacturer.
4.1
Electrical connection
Follow common safety regulations for mains voltage (230 or 115 V AC) connecting additional devices operat-
ing with this mains voltage (e.g. transformers). Touching mains voltage can be mortal. A non expert connec-
tion and mounting can cause serious health or material damages.
Only qualified specialists are allowed to connect such devices to the mains voltage.
1
2
3
5
7
6
4