WIKA CPB5000HP - Handbuch (Seite 5)

Pressure Balance High-Pressure GB
CPB 5000 HP
WIKA Operating Instructions Pressure Balance High-Pressure Version 2.3 5
1.2 Safety Instructions .
Read these operating instructions carefully prior to operating the pressure
balance high-pressure CPB 5000 HP. Its trouble-free operation and reliability
cannot be guaranteed unless the safety advise given in this manual is followed
when using the device.
1. The system must only be operated by trained and authorised personnel who know the manual and
can work according to them.
2. Trouble-free operation and reliability of the device can only be guaranteed so long as the
conditions stated under "Setting up the device" are taken into consideration.
3. The CPB 5000 HP always has to be handled with the care required for a precision instrument
(protect from humidity, impacts and extreme temperatures). The device, the piston-cylinder-system
and the mass-set must be handled with care (don't throw, hit, etc.) and protect them from
contamination. By no means apply any force to the operating elements of the CPB 5000 HP.
4. If the device is moved from a cold to a warm environment, you should therefore ensure the device
temperature has adjusted to the ambient temperature before trying to put it into operation.
5. If the equipment is damaged and might no longer operate safely, then it should be taken out of use
and securely marked in such a way so that isn't used again.
Operator safety may be at risk if:
There is visible damage to the device
The device is not working as specified
The device has been stored under unsuitable conditions for an extended period of time.
If there is any doubt, please return the device to the manufacturer for repair or maintenance.
6. Customers must not attempt to alter or repair the device themselves. If the instrument is opened or
attachment parts or the tubing are released, its trouble-free operation and reliability is impaired and
endangers the operator. Please return the device to the manufacturer for any repair or
maintenance.
7. There must be used only the original sealings in the device.
8. Any operation not included in the following instructions or outside the specifications must not be
attempted.