Lenze 931ExK10 - Handbuch (Seite 37)

Safety instructions
General safety and application notes for Lenze controllers
1

37 MA 13.0001 DE-EN DE/EN 2.0
1 Safety instructions
1.1 General safety and application notes for Lenze controllers
(in accordance with Low-Voltage Directive 2006/95/EC)
General
During operation, Lenze controllers (frequency inverters, servo inverters, DC
controllers) and the accessory components can include live and rotating parts,
depending on their type of protection. Surfaces can be hot.
Non-authorised removal of the required cover, inappropriate use, incorrect
installation or operation, create the risk of severe injury to persons or damage
to material assets.
More information can be obtained from the documentation.
All operations concerning transport, installation, and commissioning, as well as
maintenance, must be carried out by qualified, skilled personnel (IEC 364 and
CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and
national regulations for the prevention of accidents must be observed).
According to this basic safety information, qualified, skilled personnel are
persons who are familiar with the assembly, installation, commissioning, and
operation of the product and who have the qualifications necessary for their
occupation.
Application as directed
Drive controllers are components designed for installation into electrical
systems or machines. They are not household appliances, but are only designed
ascomponentsforindustrialorprofessionalpurposesintermsof EN 61000-3-2.
When installing the controllers into machines, commissioning (i.e. starting of
operation as directed) is prohibited until it is proven that the machine complies
with the regulations of the EC Directive 98/37/EC (Machinery Directive);
EN 60204 must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when
there is compliance with the EMC Directive (89/336/EEC).
The technical data and information on connection conditions can be obtained
from the nameplate and the documentation. They must be observed in any
case.
Warning: The availability of controllers is restricted according to EN 61800-3.
These products can cause radio interferences in residential areas. In this case it
may be required to implement corresponding measures.