Mounting, Engli sh, Uni fit bracket – Lupine Wilma 2800 Lumens - 28W Benutzerhandbuch

Seite 15: Helmet bracket

Advertising
background image

28

29

Wilma

Wilma

Engli

sh

2

2

Mounting

Uni Fit bracket:

Mounting the light on bicycle handlebars and

similarly shaped objects, or on Lupine bicycle

helmet brackets or headbands, is quick and

easy thanks to the flexible rubber O-ring.

For a demonstration of how to mount the light

on handlebars, see the video on our Website

(click “Support”).

Use the included larger O-ring for oversized
handlebars.

Note:

To change the o-ring, unscrew the

bracket and replace the O-ring.

Lateral adjustment:

To adjust the light for freeride or downhill
handlebars, you can rotate the bracket on
the lamp housing 4 degrees to either side.
To do this, loosen the screw on the bracket.

The Lupine helmet bracket can be attached to virtually

any helmet that has ventilation slits. The bracket is easy

to mount. For further information, see the text and

pictures on the pages that follow.

Pull both straps through the best situated ventilation slits.
Try out various options until you find the optimal position.

Helpful hints:

Since virtually all ventilation slits are raked

forward, its best to mount the bracket as far as possible
under the edge of the helmet, to prevent the bracket from
slipping.

In doing this, thread the two straps through the

slits as shown in the picture. When the straps are new they
are stiff and therefore somewhat difficult to pull through the
slits, which is normal. However, with use the straps will
soften and become easier to use.

Make the straps as tight as possible by pulling hard on
them, and in such a way that the bracket is centered.
After pressing the two velcro elements (upper and
lower strap) together, tuck the trailing ends of the
velcro under your helmet to avoid unsightly “ears.”
Grasp the bracket and move it back and forth with
moderate force, to make sure that it is firmly in place.

Helpful hints:

Normally the two straps are too long. However, only shorten them after

mounting and removing the bracket once, because once you’ve snipped off the extra length,

you can’t put it back on again.

Helmet bracket:

1

2

4 °

4 °

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: