Charger/wiesel micro charger, Micro charger, Li-ion – Lupine Wilma 2800 Lumens - 28W Benutzerhandbuch

Seite 21: Engli sh, Plugging in the device: charging, Led display: charged-capacity display, Led display, Connecting: charging

Advertising
background image

40

41

Wilma

Wilma

Engli

sh

5

Charger/Wiesel

Micro Charger

Li-Ion

Micro Charger

Li-Ion

Plug the included power supply into an outlet and

connect the power supply to the Micro Charger.

Plug the battery into the charger when the orange

LED begins flashing.

Charging begins automatically, and the orange and blue LEDs

come on.

The brightness of the blue LED varies according to the

strength of the charging current, i.e. the higher the current the

brighter the LED.

When the battery is fully charged, and the charger switches to

Full,

the green LED comes on.

Plugging in the device:

Charging:

Important!

This charger is to be used to charge rechargeable Li-Ion batteries only and

is not to be used for NiMH batteries.
Do NOT use non-rechargeable batteries. – Risk of explosion!

Do NOT open the charger or power supply. Only the manufacturer is authorized to do this.

Orange/blue LED on: battery being charged

(The stronger the charging current, the brighter the blue LED)

Orange LED flashes: standby mode

Green LED on:

battery fully charged

When a fully charged battery is disconnected from the charger, the battery’s charged capacity is

shown as follows via the charger’s green and orange LEDs, after the green LED flashes briefly:
Green LED:

each flash = 1 Ah

Orange LED:

each flash = 1/10 Ah

LED display:

Charged-capacity display:

Charging starts automatically.

Depanding on the version, the control-LED can go red or only green.

The battery can be left plugged into the charger for an indefinite period. Although this will not dama-

ge the battery, it is not advisable for Li-Ion batteries since they do not require conservation charging.

When kept in a cool place, the annual self-discharging rate for such batteries is 15 %.

LED display:

Plug the included Wiesel charger into an outlet and connect it to the battery.

Connecting:

Charging:

Warning!

This charger is to be used to charge rechargeable Li-Ion batteries only.

It is NOT suitable for charging NiMH batteries!
Do NOT use non-rechargeable batteries. – Risk of explosion!

This charger may be opened ONLY by the manufacturer!

Version 1:
LED red on: charging

LED green on: battery is fully charged

6

Version 2:
LED green on: charging

LED off: battery is fully charged

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: