Lupine FastClick Batteries - Handbuch (Seite 12)

22 Charger One/Micro Charger/Wiesel/Piko TL 23 Charger One/Micro Charger/Wiesel/Piko TL
En
gl
is
h
1 2
Programming Charger One Operation Charger One
Charger One display messages at a glance:
Restoring default settings:
If you accidentally access the Charger One programming function or if you make an error while
programming the device, proceed as follows to restore the device’s default settings:
Unplug Charger One and disconnect it from the battery. Plug in the power supply while holding
down the Select button.
Release the select button. The default settings have now been reactivated
and the software version will be displayed. You may then have to select the correct program for
your battery by pressing the button quickly one or more times, as needed.
12 V charging cable
The 12 V charging cable enables you to charge Char-
ger One in your car, mobile home or the like. Please
note that when you start the engine,
“Error” may
appear on the device display. In such a case,
reconnect the charger to the 12 V power supply.
Charger ready for use: ABCDE ready for charge
During the charging process: ABCDE charge
When the battery is fully charged: ABCDE full
During a conservation charging pulse: ABCDE pulse
Battery disconnected from charger during or after charging: ABCDE disconnected
Faulty electrical connection: ABCDE error
(Disconnect the power supply and wait four seconds before plugging it back in)
(not compatible with the Wiesel)
Note: Charger One features numerous individual programming options. However, the default
settings do not need to be changed in any way.
To select a program in the main menu, quickly press the Select button repeatedly until you reach the
desired program. The following programs are available:
Li-Ion charging mode
The charging and deactivation characteristics of this mode are specially designed for our Li-Ion batte-
ries. Charger One ends the charging process automatically when the battery is fully charged. Display:
Li-Ion full. The battery can be left connected to the charger. Disconnecting the battery
from the charger shortly before use will not impair the battery’s performance in any way.
Li 50 % charging mode
This mode helps keep the battery in an optimally charged state. Half charged Li-Ion batteries should
be kept in a cool place.
Li 50 % charging mode discharges and recharges any Li-Ion battery to 50
percent of its capacity, a function that helps prevent battery aging. The battery is first discharged,
then completely charged, and then discharged to 50 % of its capacity. When this process is completed
(indicated by
“Storage” on the display), you can either disconnect the battery or leave it connected.
However, the battery must be recharged prior to the next use. This mode is suitable for use in cases
where the battery will be stored for four to six weeks.
NiMH charging mode
The charging and deactivation characteristics of this mode are specially designed for our NiMH
batteries. After the battery has been charged, the charger automatically switches to pulse conser-
vation charging.
Display: Pulse - full. The battery can and should be left connected to the charger.
Owing to their high self-discharging rates, NiMH batteries should not be removed from the charger
until shortly before use.
Main menu: