Lupine FastClick Batteries - Handbuch (Seite 17)

32 Charger One/Micro Charger/Wiesel/Piko TL 33 Charger One/Micro Charger/Wiesel/Piko TL
En
gl
is
h
Charger Piko TL
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current: up to 1.2 A
Compatible batteries: Li-Ion 7.2 V
Display:
charging control via one LED
Charger Wiesel V3/V4:
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current: up to 0.7 A
Geeignete Akkus:
Li-Ion 7.2 V
Display: charging control via one LED
Charger Piko TL:
The charger comes with a plug adapter.
(available plugs: for continental Europe, UK, USA, AU).
Plug the included power supply
into an outlet and connect the
power supply to the Piko TL Charger
Green LED on: battery being charged
Green LED off: battery is fully charged
Charging begins automatically, and the green LED come on.
When the battery is fully charged, and the charger switches to Full, the green LED goes off. The
battery can be left plugged into the charger for an indefinite period. Although this will not damage
the battery, it is not advantageous for Li-Ion batteries since they do not require conservation
charging. When kept in a cool place, the annual self-discharging rate for such batteries is 15 %.
Note: The green LED only comes on during the charging process and will not come on if a fully
charged battery is plugged into the device.
Components:
Plugging in the device:
LED display:
Charging:
 Important! This charger is to be used to charge rechargeable Li-Ion batteries only and
is not to be used for NiMH batteries.
 Do NOT use non-rechargeable batteries. – Risk of explosion!
 Do NOT open the charger or power supply. Only the manufacturer is authorized to do this.
Input voltage: 100 – 240 V~, 50 – 60 Hz
Output voltage: 12 V =, 2 A
Input voltage: 12 – 14 V =,>= 2 A from power supply or 12 V charging cable
Charging current: up to 2.5 A
Discharge current: 0.1 – 0.5 A
Compatible batteries: Li-Ion 7.2 V, Ni-MH 2 – 6 cells
Display:
illuminated two-line 16 character display
Terminals: polarity-protected input and output terminals
Input voltage: 12 – 14 V =,>= 2 A from power
supply or or 12 V charging cable
Charging current: up to 2 A
Compatible batteries: Li-Ion 7.2 V
Display:
charging control via three LEDs
Terminals: polarity-protected input and
output terminals
Power supply:
(Charger One, Micro Charger)
Charger One:
Micro Charger:
Adapter cable
Using the adapter cable (Art.No. 040) our Piko TL can be
charged on a Charger One, Wiesel or Microcharger.