M&C TechGroup MP47 Ex Operator's manual - Handbuch (Seite 95)

KNF Motor M 56 Ex Operation
Translation of orignal Operating and Installation Instructions, english, KNF 121220-121648 01/13 15
7. Operation
Î Only operate the motor under the operating parameters and
conditions described in Chapter 4, Technical data, and in Sec-
tion 2.3, Use in hazardous areas.
Î Make sure the motor is used properly (see section 2.1).
Î Make sure the motor is not used improperly (see section 2.2).
Î Observe the safety precautions (see Chapter 3).
WARNING
Danger of explosion due to increased ambient
temperature!
Î Monitor ambient temperature (compression heat,
motor heat).
Î Ensure sufficient supply of cooling air.
WARNING
Danger of serious damage to persons or property
Changes from normal operation (higher power
consumption, temperatures or vibration, unusual
noises or odors, triggered monitoring devices) are an
indication that function has been affected.
Î In case of any deviations from normal operation,
switch off the motor, then determine and remedy
the cause.