Hach-Lange LZV937 - DR 6000 additional software enzymology tests - Handbuch (Seite 27)

English 27
English
General information
Safety information
Read through the entire user manual carefully before you unpack the
device, set up and put into operation. Pay attention to all danger and
caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
To ensure safety when using the instrument, the DR6000 may not be
used in any manner that is not described in this user manual.
Danger notes in this user manual
Note: Information that supplements points in the main text.
Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or
damage to the instrument could occur if not observed. For symbols
attached to the instrument, corresponding warning notes are found in
the user manual.
Installation notes
1. Select SYSTEM CHECKS > INSTRUMENT UPDATE.
2. Connect the USB stick with the additional software "Enzymology
Tests LZV937" to a USB connection (type A) of the DR 6000.
3. Confirm with OK.
The software is installed.
4. Switch the DR 6000 off after the complete installation at the power
source and start it again.
Note: Wait at least 20 secondsbefore restarting the instrument in
order to avoid damaging its electronics.
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided, can
result in death or serious injury.
W A R N I N G
Indicates a potentially or imminently dangerous situation that, if it is not avoided,
can lead to death or to serious injuries.
C A U T I O N
Indicates a possible dangerous situation that can have minor or moderate injuries
as the result.
N O T I C E
Indicates a situation that, if it is not avoided, can lead to damage to the device.
Information that requires special emphasis.
This symbol may be attached to the device and references the
operation- and/or safety notes in the user manual.
Electrical equipment marked with this symbol may not be disposed of
in European domestic or public disposal systems after 12 August
2005. In conformity with European local and national regulations (EU
Directive 2002/96/EC), European electrical equipment users must
now return old or end-of life equipment to the manufacturer for
disposal at no charge to the user.
Note: For return for recycling, please contact the equipment
manufacturer or supplier for instructions on how to return
end-of-life equipment, manufacturer-supplied electrical
accessories, and all auxiliary items for proper disposal.