WIKA T32.xS - Handbuch (Seite 23)

GB
11258421.10 08/2014 GB/D
WIKA operating instructions model T32.xS 23



6.3.1 Configuration via the PC
To configure the transmitter, both configuration software and a HART ®
modem are needed. WIKA offers 3 different HART ® modem models
for this.

HART ® modem with USB interface, model 010031,
order No. 11025166

HART ® modem with RS232 interface, model 010001,
order No. 7957522

Bluetooth HART ® modem, ATEX, CSA, FM approved, model 010041,
on request
The HART ® modem may also be used in conjunction
with other configuration software (see chapter 8 “WIKA
T32 configuration software”).
WIKA T32 configuration software
We recommend using our WIKA T32 configuration software. This
software is regularly updated and adapted to the firmware extensions
of the T32, so that you always have full access to all functionalities
and parameters of the transmitter (see chapter 8 “WIKA T32
configuration software”).
Further configuration software
With the following software tools it is also possible to carry out
configurations at the T32 e.g.:
■ AMS and SIMATIC PDM (T32_EDD)
■ FieldMate, PACTware, SmartVision and Fieldcare (DTM_T32)
■ DTM in FDT 1.2 frame application
With any other HART ® configuration tool the generic mode
functionalities can be operated (e.g. measuring range or Tag No.).
6. Commissioning, operation