WIKA T32.xS - Handbuch (Seite 30)

GB
11258421.10 08/2014 GB/D
30 WIKA operating instructions model T32.xS
9. Electrical connections
WARNING!
Observe the safety-technical maximum values for the
connection of the power supply and the sensors, see
chapter 10.3 “Safety-technical maximum values”.
When working on the transmitters (e.g. installation/removal,
maintenance work) take measures to prevent electrostatic discharge
from the terminals.
WARNING!
Only carry out installation in a de-energised state!
The connected wires must be checked to ensure they
are connected properly. Only well-secured wires can
guarantee a fault-free operation.
Input
Sensor
Output
4 ... 20 mA loop
For head mounting and rail mounting case, connection clamps for the
HART ® modem are available.
9. Electrical connections