WIKA T32.xS - Handbuch (Seite 28)

GB
11258421.10 08/2014 GB/D
28 WIKA operating instructions model T32.xS
To get complete access to all functions and parameters
of the T32, you must choose the access level “Specialist”.
After installation, by default, no password is activated!
8.2 Connection
Through the menu entry “connect” →
“Single instrument”, it will try to establish
communication with a HART ® -capable
device with the HART ® Poll Address 0
(zero). If this attempt is unsuccessful, the
software will try to establish a Multidrop
connection. The addresses 1-15 will be successively connected and will
try to establish communication to a connected device.
Connection is only possible to a single instrument at any
one time!
After successful connection the
software shows the basic data for
the connected instrument:
■ TAG mark
■ Description
■ User message
■ Serial number
■ Instrument model and version
■ Manufacturer and the PC port
used
Confirm connection established with “OK”.
8.3 Parameter configuration (configurable)
All data important for operating can be
adjusted in the menu “Instrument data” →
“Edit instrument data”.
8. WIKA T32 configuration software