Lenze 712 E.3B - Handbuch (Seite 42)

Safety instructions
General safety instructions and application notes for Lenze drive controllers
2

42 EDB712 DE/EN 2.1
2 Safety instructions
2.1 General safety instructions and application notes for Lenze drive controllers
(as per Low voltage directive 2006/95/EC)
General
Lenze drive controllers (voltage controllers) and associated components can
have, depending on their degree of protection, live parts or moving or rotating
parts when in operation. Surfaces may be hot.
On incorrect removal of the necessary cover, on improper use, on incorrect
installation or incorrect operation there is a risk of serious injury or damage.
You will find further information in the documentation.
All work on transport, installation, commissioning and servicing is only allowed
to be undertaken by appropriately skilled personnel (IEC 364 and
CENELEC HD 384 or DIN VDE 0100 and IEC Report 664 or DIN VDE 0110 and
national health and safety regulations).
Appropriately skilled personnel in the context of these basic safety instructions
are people who are familiar with the installation, mounting, commissioning
and operation of the product and who have qualifications to suit their task.
Application as directed
Drive controllers are components that are intended to be installed in electrical
systems or machines. They are not household appliances, they are components
that are only intended for industrial use or professional use in the context of
EN 61000-3-2.
On the installation of the drive controllers in machines, commissioning (i.e.
commencing operation as directed) is forbidden until it has been determined
that the machine complies with the stipulations of the EU directive 2006/42/EC
(Machinery directive); observe EN 60204.
Commissioning (i.e. commencing operation as directed) is only allowed in case
of compliance with the EMC directive (2004/108/EC).
The drive controllers comply with the requirements of the Low voltage directive
2006/95/EC. The harmonised standard EN 61800-5-1 is applied to the drive
controllers.
For technical data and information on supply conditions, refer to the nameplate
and the documentation. It is imperative you comply with these data.
Warning: The drive controllers are products that, in accordance with
EN 61800-3, can be used in drive systems of category C2. These products can
cause interference in the residential area. In this case it may be necessary for the
operating organisation to take appropriate measures.