Lenze ELCAFHIxxx4E34NNER Highline - Handbuch (Seite 43)

l
43 EDKLCFH1134−EER DE/EN 1.0
Status display: device
Pos. Colour State Description
ERR Red
Off No fault
Blinking Active fault
RUN Green
On Device enabled
Blinking Device inhibited
IN1 Green
On DI1 = HIGH
Off DI1 = LOW
IN2 Green
On DI2 = HIGH
Off DI2 = LOW
... ... ... ...
IN7 Green
On DI7 = HIGH
Off DI7 = LOW
IN8 Green
On DI8 = HIGH
Off DI8 = LOW
OUT1 Yellow
On DO1 = HIGH
Off DO1 = LOW
OUT2 Yellow
On DO2 = HIGH
Off DO2 = LOW
OUT3 Yellow
On DO3 = HIGH
Off DO3 = LOW
OUT4 Yellow
On DO4 = HIGH
Off DO4 = LOW
Status display: fieldbus interface
Pos. Colour State Description
BUS error Red Not active
BUS status Green Not active
Status display: drive−based safety
Pos. Colour State Description
SAFE status Yellow
On Safe torque off (STO) is not active
Off Safe torque off (STO) is active
SAFE error Red
On
System error:
After a serious internal error STO is activated.
Off Error−free operation
SAFE IN1 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN2 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN3 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN4 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE OUT1 Yellow
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE OUT2 Yellow Not active