Lenze ELCAFHIxxx4E34NNER Highline - Handbuch (Seite 74)

Electrical installation
Control terminals
4
l
74 EDKLCFH1134−EER DE/EN 1.0
Digital outputs
)
Note!
ƒ Delay time between triggering and switching of the digital outputs: approx.
100 ms.
ƒ If inductive loads are being connected, it is essential to use a spark
suppressor at the digital output.
X45 − Digital outputs DO1, DO2
Pin Signal Description Data
Connector: female, 5−pin, M12
1 n. c. Not assigned
2 Signal 2 DO2 HIGH U
DC
at X11
3 Gnd Reference potential LOW 0 ... +4 V
4 Signal 1 DO1 Max. 500 mA per output
5 n. c. Not assigned
X46 − Digital outputs DO3, DO4
Pin Signal Description Data
Connector: female, 5−pin, M12
1 n. c. Not assigned
2 Signal 2 DO4 HIGH U
DC
at X11
3 Gnd Reference potential LOW 0 ... +4 V
4 Signal 1 DO3 Max. 500 mA per output
5 n. c. Not assigned
Analog inputs, analog outputs
X51 − Analog inputs AI1, AI2
Pin Signal Description Data
Connector: male, 4−pin, M12
1 AI1+ Analog input 1
2 AI1− Analog input 1
3 AI2+ Analog input 2
4 AI2−
X52 − Analog outputs AO1, AO2
Pin Signal Description Data
Connector: male, 4−pin, M12
1 AO1 Analog output 1
2 AO2 Analog output 2
3 GND Reference potential
4 GND