Safety instructions, 1safety instructions – Lenze ELCAFHIxxx4E34NNER Highline Benutzerhandbuch

Seite 47

Advertising
background image

Safety instructions

General safety and application notes for Lenze controllers

1

l

47

EDKLCFH1134−EER DE/EN 1.0

1

Safety instructions

1.1

General safety and application notes for Lenze controllers

(in accordance with Low−Voltage Directive 2006/95/EC)

General

Lenze controllers (frequency inverters, servo inverters, DC controllers) and the accessory
components can include live and rotating parts − depending on their type of protection −
during operation. Surfaces can be hot.

Non−authorised removal of the required cover, inappropriate use, incorrect installation or
operation create the risk of severe injury to persons or damage to material assets.

More information can be obtained from the documentation.

All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364/CENELEC HD 384
or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national regulations for the
prevention of accidents must be observed).

According to this basic safety information qualified, skilled personnel are persons who are
familiar with the assembly, installation, commissioning, and operation of the product and
who have the qualifications necessary for their occupation.

Application as directed

Drive controllers are components which are designed for installation in electrical systems
or machinery. They are not to be used as domestic appliances, but only for industrial
purposes according to EN 61000−3−2.

When installing the controllers into machines, commissioning (i.e. starting of operation as
directed) is prohibited until it is proven that the machine corresponds to the regulations
of the EC Directive 98/37/EC (Machinery Directive); EN 60204 must be observed.

Commissioning (i.e. starting of operation as directed) is only allowed when there is
compliance with the EMC Directive (89/336/EEC).

The controllers meet the requirements of the Low−Voltage Directive 73/23/EEC. The
harmonised standard EN 61800−5−1 applies to the controllers.

The technical data as well as the connection conditions can be obtained from the
nameplate and the documentation. They must be strictly observed.

Warning: The controllers are products which can be installed in drive systems of category
C3 according to EN 61800−3. These products cause radio interference and are therefore not
suitable for operation on public supply systems supplying residential areas.

Transport, storage

Please observe the notes on transport, storage and appropriate handling.

Observe the climatic conditions according to the technical data.

Advertising