Beurer ME80 Benutzerhandbuch
Seite 36
36
Measurement
method C
“left hand–right hand”
(approximately corresponds to “lead 1”)
Place your right index finger on the two upper electrodes on the
device.
Place a finger of your left hand on the lower electrode.
Press the lower electrode until you hear or feel a click.
Important: Do not press the device too firmly against your skin.
Note: Please note that there must be no skin contact between your right and left hand
(measurement method C) or hand and chest (measurement methods A/B).
Otherwise, the measurement cannot be taken correctly.
Stay still during the measurement, hold the device still and do not speak. Movements of
any kind will falsify the measurements.
3. The device begins to beep and the number display flashes for a few
seconds. This indicates that the measurement is about to begin.
4. The measurement is taken and the results are shown at the end of the
30-second countdown.
Note: The measurement will not be saved if the lower electrode is remo-
ved up to three seconds after the start of the measurement.